Panduit WGCB12BL Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Accessoires pour systèmes de câblage Panduit WGCB12BL. Panduit WGCB12BL Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
technical information
Wire fill table:
Material:
Black (BL): Pre-galvanized steel wire and galvanized cold rolled steel prior to paint
Pre-Galvanized (PG): Pre-galvanized steel wire and galvanized cold rolled steel prior to paint
Electro Zinc (EZ): Steel wire and cold rolled steel, electro zinc plated
ABS (Side Waterfall)
RoHS Compliant
Approvals:
UL Classified for their suitability for use as Equipment Grounding Conductor in accordance
with Sections 392.3(C) and 392.7(B) of the NEC
Metal Cable Tray in accordance with CAN/CSA-C22.2 No.126.1-02
NEMA VE 1-2002 and ANSI/NFPA 70, “National Electric Code” (NEC)
Corrosion resistant per ASTM A653/A653M-08 and A641/A641M-09
EN61537:2007 Cable Tray Systems and Cable Ladder Systems for Cable Management
Black: Corrosion resistant per ASTM A653/A653M-08 and A641/A641M-09
Electro Zinc: ASTM B633 SC3, Type III
CSI spec form:
LP-CSISPEC-WG
www.panduit.com
Wyr-Grid
®
Overhead Cable
Tray Routing System
SPECIFICATION SHEET
applications
key features and benefits
Strength to weight ratio
The design of the Wyr-Grid
®
Pathway Sections provides a greater strength to weight
ratio than competitive wire basket; easier handling translates into faster installation
Grid pattern
The 4" x 5" wire mesh grid pattern allows greater amounts of cables and QuickNet
®
Cassettes to pass through grid openings without additional cutting, reducing
installation time
No integral sidewalls
Less cutting on straight sections, no cutting at intersections and waterfalls reduces
installation time
Snap-on sidewalls
Sidewalls can be attached where needed to retain cables within the Wyr-Grid
®
Pathway Sections providing greater configuration versatility
Bend radius control sidewalls
Protects cables at intersections and can be easily attached without cutting
or fabrication
Bonding splice
A thread cutting screw pierces the paint of adjacent cable tray sections providing a
completely bonded connection, ensuring electrical continuity between the sections
Snap-on waterfalls
Protects cables when transitioning down to equipment and can be easily attached
without cutting or fabrication
Wyr-Grid
®
Pathway Sections
8"W x 120"L: WG8**10
12"W x 120"L: WG12**10
18"W x 120"L: WG18**10
24"W x 120"L: WG24**10
30"W x 120"L: WG30**10
Splice Connectors
8", 12", and 18"
quick splice: WGSPL1218**
24" and 30" quick splice: WGSPL2430**
Intersection splice: WGINTSPL**
Snap-On Sidewalls
2" sidewall: WGSDWL2**
4" sidewall: WGSDWL4**
6" sidewall: WGSDWL6**
Waterfalls
4" side waterfall: WGSWF4BL
Bottom waterfall: WGBTMWF**
Mounting Brackets
8" trapeze bracket: WGTBS8**
12" trapeze bracket: WGTB12**
18" trapeze bracket: WGTB18**
24" trapeze bracket: WGTB24**
30" trapeze bracket: WGTB30**
12" cantilever bracket: WGCB12**
18" cantilever bracket: WGCB18**
24" cantilever bracket: WGCB24**
12" rack mount bracket: WG2PRB12BL
18" rack mount bracket: WG2PRB18BL
24" rack mount bracket: WG2PRB24BL
8" wall bracket: WGWMTB8**
12" wall bracket: WGWMTB12**
18" – 30" wall bracket: WGWMTB1830**
Strut bracket: WGSTRKT**
Vertical mounting
bracket: WGVWMBEZ
Intersection Bend Radius Control
2" high sidewall: WGINTBRC2**
4" high sidewall: WGINTBRC4**
6" high sidewall: WGINTBRC6**
Tray Liner (Offered in PG only)
8" tray liner: WGTL8PG
12" tray liner: WGTL12PG
18" tray liner: WGTL18PG
24" tray liner: WGTL24PG
30" tray liner: WGTL30PG
Divider Wall (Offered in PG only)
2" divider wall: WGDW2PG
4" divider wall: WGDW4PG
6" divider wall: WGDW6PG
Accessories
Manual cutting tool: WGCT-M
Hydraulic
cutting tool: WGCT-A
Hardware kit: WGHRDWKT**
**Substitute BL = Black Powder Coat,
EZ = Electro Zinc Plated
specifications
The overhead cable tray routing system shall consist of pathway sections, splice
connectors, sidewalls, waterfalls, mounting brackets, and accessories designed to
route and manage copper, fiber optic, or power cables. The pathway sections shall be
provided in five widths: 8" (203mm), 12" (305mm), 18" (457mm), 24" (610mm) and
30" (762mm). Optional snap-on sidewalls shall include 2" (50mm), 4" (102mm), and
6" (152mm) heights that can be hand installed at any location along pathway sections.
Sidewall waterfalls and intersection bend radius parts shall provide 3" (76mm) bend
radius protection. Trapeze, cantilever, and wall mount brackets shall be provided to
support the system. Components shall be painted black or electro zinc plated.
Y
X
X
(in.)
Y
(in.)
Internal
Area
(in.
2
)
Category 6A
Dia. 0.300"
7.6mm
Category 6
Dia. 0.240"
6.1mm
X
(in.)
Y
(in.)
Internal
Area
(in
2
)
Category 6A
Dia. 0.300"
7.6mm
Category 6
Dia. 0.240"
6.1mm
2 24.3 172 269
24.2
2 48.3 342 534
12.2 4 48.7 344 538 4 96.7 684 1069
6 73.0 516 807 6 145.0 1026 1603
18.2
2 36.3 257 401
30.2
2 60.3 427 666
4 72.7 514 804 4 120.7 854 1334
6 109.0 771 1205 6 181.0 1280 2000
The Wyr-Grid
®
Overhead Cable Tray System
is designed to route and manage copper data
cables, fiber optic, or power cables within data
centers, connected buildings, and industrial
automation applications. Innovative features
provide quick, safe, and easy assembly for reduced
installation costs and faster deployment. Can easily
accommodate FiberRunner
®
Pathways into the
application to provide a segregated copper and fiber
cabling strategy.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Tray Routing System

technical informationWire fill table:Material:Black (BL): Pre-galvanized steel wire and galvanized cold rolled steel prior to paint Pre-Galvanized (PG

Page 2

©2014 Panduit Corp. ALL RIGHTS RESERVED.FRSP13--WW-ENG9/2014Wyr-Grid® Overhead Cable Tray Routing SystemWORLDWIDE SUBSIDIARIES AND SALES OFFICESFor a

Commentaires sur ces manuels

Pas de commentaire